RE-2X(St)H PIMF
XLPE Insulated, LSZH Sheathed, Individual and Overall Screened Instrumentation Cables (Multipair)ApplicationThe unarmoured LSZH sheathed cables are generally use for indoor installation and suitable for wet and damp areas. Generally, the cables are us…
RE-2X(St)H PIMF.pdf Contact us

XLPE Insulated, LSZH Sheathed, Individual and Overall Screened Instrumentation Cables (Multipair)

Application

The unarmoured LSZH sheathed cables are generally use for indoor installation and suitable for wet and damp areas. Generally, the cables are used within industrial process manufacturing plants for communication, data and voice transmission signals and services. Also used for theinterconnection of electrical equipment and instruments, the LSZH sheath can reduce toxic smoke and fume emission.

Standards

Basic design to EN 50288-7

Fire Performance

Flame Retardance (Single Vertical Wire Test)EN 60332-1-2; IEC 60332-1-2; BS EN 60332-1-2; VDE 0482-332-1; NBN C 30-004 (cat. F1); NF C32-070-2.1(C2); CEI 20-35/1-2; EN 50265-2-1*; DIN VDE 0482-265-2-1*
Reduced Fire Propagation(Vertically-mounted bundled wires & cable test)EN 60332-3-24 (cat. C); IEC 60332-3-24; BS EN 60332-3-24; VDE 0482-332-3; NBN C 30-004 (cat. F2); NF C32-070-2.2(C1); CEI 20-22/3-4; EN 50266-2-4*; DIN VDE 0482-266-2-4
Halogen FreeIEC 60754-1; EN 50267-2-1; DIN VDE 0482-267-2-1; CEI 20-37/2-1 ; BS 6425-1*
No Corrosive Gas EmissionIEC 60754-2; EN 50267-2-2; DIN VDE 0482-267-2-2; CEI 20-37/2-2 ; BS 6425-2*
Minimum Smoke EmissionIEC 61034-1&2; EN 61034 -1&2; DIN VDE 0482-1034-1&2; CEI 20-37/3-1&2; EN 50268-1&2*; BS 7622-1&2*
No Toxic gasesNES 02-713; NF C 20-454
Sunlight ResistanceUL 1581 section 1200
Oil ResistanceICEA S-73-532**

Note: Asterisk * denotes superseded standard, ** denotes Test temperature +60°C, duration 4h. Retention: min 60% of tensile strength/min.60% of elongation, *** denotes optional.

Voltage Rating

300/500V

Cable Construction

Conductor : Annealed copper solid or plain copper stranded to IEC 60228 Class 2.

Insulation : Extruded cross-linked XLPE compound, EN 50290. 2-29.

Pairs : Two insulated conductors uniformly twisted together with a lay not exceeding 100mm

Individual Screen : Aluminium/polyester tape is applied over each pair metallic side down in contact with tinned copper drain wire, 0.5mm2

Binder tape : PETP transparent tape

Overall Screen : Aluminium/polyester tape is applied over the laid up pairs metallic side down in contact with tinned copper drain wire, 0.5mm2

Outer Sheath : Thermoplastic LSZH compound type LTS3 as per BS 7655-6.1 (Thermosetting LSZH compound type SW2-SW4 as per BS 7655 2.6 can be offered.). UV resistance, hydrocarbon resistance, oil resistance, anti rodent and anti termite properties can be offered as option.

Colour Code

Insulation : Black / White, continuously numbered on white core(1, 2..)for multipair.

Outer Sheath : Black or blue for intrinsically safe systems

Physical and Thermal Properties

Temperature Range During Operation (Fixed State) : -30°C – +90°C

Temperature Range During Installation (Mobile State) : -5°C – +50°C

Minimum Bending Radius : 7.5 X Overall Diameter

Electrical Roperties

Conductor Area Sizemm²0.50.751.01.31.5
Insulation thickness (nominal)mm0.40.40.40.450.45
Conductor resistance (20°C)Ω/km36.72518.514.212.3
Insulation resistance (20°C)MΩ.km(Min.)5000
Mutual Capacitance (1 kHz)pF/m(Max.)115
InductancemH/km (Max.)1
L / R (ratio) (max.)μH/Ω2525254040
Operating voltage UrmsV300
Test VoltageCore to CoreV1500
Core to ScreenV1500

Construction Parameterst

Caledonian Cable CodeRE-2X(St)H PiMF
No. of Pairs ×2×Cross SectionNominal Insulation ThicknessNominal Outer Sheath ThicknessNominal Overall DiameterApprox. Weight
No.×2×mm²mmmmmmkg/km
0.5mm2, Multipair
RE-2X(St)H PiMF 2P0.52x2x0.50.350.98.785
RE-2X(St)H PiMF 4P0.54x2x0.50.351.010.2120
RE-2X(St)H PiMF 5P0.55x2x0.50.351.011.2145
RE-2X(St)H PiMF 6P0.56x2x0.50.351.012.1170
RE-2X(St)H PiMF 8P0.58x2x0.50.351.113.1214
RE-2X(St)H PiMF 10P0.510x2x0.50.351.215.1265
RE-2X(St)H PiMF 12P0.512x2x0.50.351.215.7286
RE-2X(St)H PiMF 16P0.516x2x0.50.351.217.8380
RE-2X(St)H PiMF 20P0.520x2x0.50.351.319.7475
RE-2X(St)H PiMF 24P0.524x2x0.50.351.421.5561
0.75mm2, Multipair
RE-2X(St)H PiMF 2P0.752x2x0.750.381.09.7101
RE-2X(St)H PiMF 4P0.753x2x0.750.381.011.2159
RE-2X(St)H PiMF 5P0.754x2x0.750.381.112.5183
RE-2X(St)H PiMF 6P0.755x2x0.750.381.113.6215
RE-2X(St)H PiMF 8P0.758x2x0.750.381.114.4272
RE-2X(St)H PiMF 10P0.7510x2x0.750.381.216.6333
RE-2X(St)H PiMF 12P0.7512x2x0.750.381.217.4383
RE-2X(St)H PiMF 16P0.7516x2x0.750.381.319.8492
RE-2X(St)H PiMF 20P0.7520x2x0.750.381.422.0603
RE-2X(St)H PiMF 24P0.7524x2x0.750.381.524.0704
1.0mm2, Multipair
RE-2X(St)H PiMF 2P1.02x2x1.00.41.010.4112
RE-2X(St)H PiMF 4P1.03x2x1.00.41.012.1179
RE-2X(St)H PiMF 5P1.04x2x1.00.41.113.5220
RE-2X(St)H PiMF 6P1.05x2x1.00.41.114.7256
RE-2X(St)H PiMF 8P1.08x2x1.00.41.215.8323
RE-2X(St)H PiMF 10P1.010x2x1.00.41.218.0401
RE-2X(St)H PiMF 12P1.012x2x1.00.41.319.0454
RE-2X(St)H PiMF 16P1.016x2x1.00.41.321.5601
RE-2X(St)H PiMF 20P1.020x2x1.00.41.423.9719
RE-2X(St)H PiMF 24P1.024x2x1.00.41.526.1884
1.3mm2, Multipair
RE-2X(St)H PiMF 2P1.32x2x1.30.451.011.4153
RE-2X(St)H PiMF 4P1.33x2x1.30.451.113.4208
RE-2X(St)H PiMF 5P1.34x2x1.30.451.114.8263
RE-2X(St)H PiMF 6P1.35x2x1.30.451.216.3318
RE-2X(St)H PiMF 8P1.38x2x1.30.451.317.6406
RE-2X(St)H PiMF 10P1.310x2x1.30.451.320.0501
RE-2X(St)H PiMF 12P1.312x2x1.30.451.421.1552
RE-2X(St)H PiMF 16P1.316x2x1.30.451.524.1728
RE-2X(St)H PiMF 20P1.320x2x1.30.451.626.8892
RE-2X(St)H PiMF 24P1.324x2x1.30.451.729.21067
1.5mm2, Multipair
RE-2X(St)H PiMF 2P1.52x2x1.50.451.011.8164
RE-2X(St)H PiMF 4P1.53x2x1.50.451.113.9235
RE-2X(St)H PiMF 5P1.54x2x1.50.451.215.5289
RE-2X(St)H PiMF 6P1.55x2x1.50.451.216.9366
RE-2X(St)H PiMF 8P1.58x2x1.50.451.318.2446
RE-2X(St)H PiMF 10P1.510x2x1.50.451.421.0565
RE-2X(St)H PiMF 12P1.512x2x1.50.451.421.9637
RE-2X(St)H PiMF 16P1.516x2x1.50.451.525.1828
RE-2X(St)H PiMF 20P1.520x2x1.50.451.627.81024
RE-2X(St)H PiMF 24P1.524x2x1.50.451.730.41219